Members Login
Username 
 
Password 
    Remember Me  
Forum Rules (Click Here) -> Ontario Rodders -> Parts For Sale -> looking for chevrolet truck front axle
Post Info TOPIC: looking for chevrolet truck front axle
34guy


MISSISSAUGA, ONT

Status: Offline
Posts: 1040
Date:
looking for chevrolet truck front axle
Permalink  
 

Looking for a 1934-1946 1/2 ton chevrolet truck front axle.If the brake assemblies are with it that would be bonus

Someone out there must have a buddy with one tossed behind the garage after a mustang 2 swap

ask around Thak's joe mac

 



Attachments
__________________

 If you cant move it with a hammer

It must be an electrical problem

 
workin class


FINCH, ONT

Status: Offline
Posts: 1261
Date:
Permalink  
 

Got a couple 55s but nothing earlier

__________________

 ///// Join THE LOSERS c.c. of Ontario Ask me how/////

LOSERS CAR CLUB
427CARL


CLINTON, ONT

Status: Offline
Posts: 3909
Date:
Permalink  
 

IMG_4967.JPG



Attachments
__________________

 

 
timmins57


TIMMINS, ONT

Status: Offline
Posts: 24
Date:
Permalink  
 

I have the front end - hub to hub - from my 36 Chev pickup . I remove it to put on a Fatman M2 set-up. If you are interested I can take some pics once the snow gets down to where I can get in the door!!

__________________
34guy


MISSISSAUGA, ONT

Status: Offline
Posts: 1040
Date:
Permalink  
 

That would be great.The snow must be half way down the door by now lol Thanks Joe Mac 

 



__________________

 If you cant move it with a hammer

It must be an electrical problem

 
slim


DUNDAS, ONT

Status: Offline
Posts: 1961
Date:
Permalink  
 

I think you can look for anything up to the 55 1st series only changes are king pin dia and boss hight . tci I believe makes a rack setup for the Ad series that works realy good. FYI axle sizes

http://www.droppedaxles.com/CHEVY_AXLES.html

 

 

 



__________________
What a long strange trip its been
34guy


MISSISSAUGA, ONT

Status: Offline
Posts: 1040
Date:
Permalink  
 

I checked out the info at sids. Most of the problems come trying to interchange late and early spindles and hubs. Want to use the 6 bolt original wire wheels.My neighbour has 55 56 truck axles (5 bolt) but the inner and outer bearing are a different inside dia. and the axle is wider. Hoping to find an early axle with juice brakes thanks joe mac 



__________________

 If you cant move it with a hammer

It must be an electrical problem

 
timmins57


TIMMINS, ONT

Status: Offline
Posts: 24
Date:
Permalink  
 

36 truck axle.JPG36 truck axle 2.JPG36 truck wheel.JPG36 truck axle.JPG

I dug into the shed and got a couple of pictures. If this is what you are looking for let me know!



Attachments
__________________
34guy


MISSISSAUGA, ONT

Status: Offline
Posts: 1040
Date:
Permalink  
 

Looks good sent you a p rivate message joe mac



__________________

 If you cant move it with a hammer

It must be an electrical problem

 
slim


DUNDAS, ONT

Status: Offline
Posts: 1961
Date:
Permalink  
 

Your neighbours 55 56 was modified chev trucks used 6 bolt to mid 60s but yes the 2nd series 55 has a wider axle just picked up two 17" artillarys similar to the ones in the picture and have 4 more coming from the west coast for my 57. mods and swaps on hubs and axles are fairly common . my 57 somehow over the years ended up with gmc hubs and spindles US truck canadian trucks will share the same parts other then trim and badging. hard to tell but the rims in the picture appear to be 16 " 37-38 same 6 x 5.5 bolt pattern .nice score for the lot good luck

__________________
What a long strange trip its been
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Forum Rules (Click Here) -> Ontario Rodders -> Parts For Sale -> looking for chevrolet truck front axle


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard