Members Login
Username 
 
Password 
    Remember Me  
Forum Rules (Click Here) -> Ontario Rodders -> Tech -> rear end ident
Post Info TOPIC: rear end ident
shag766


FOXBORO, ONT

Status: Offline
Posts: 2237
Date:
rear end ident
Permalink  
 

ok guys, i just just removed the cover off a 10 bolt rear from a 70 something chev.  here's the #'s from the ring gear- G01 882411 37 9  usa k3     what is it. thnx.

 

  this will helpIMG_0308.JPGIMG_0305.JPG



-- Edited by shag766 on Monday 20th of May 2013 08:14:16 AM

Attachments
__________________
if your not the lead dog-the view is all the same
fatstax


COBOURG, ONT

Status: Offline
Posts: 2145
Date:
Permalink  
 

the 37 9 means its a 411 gear ratio.  other than that the ring gear i dont think will tell you much about what the carrier is



__________________
hemi43


ONTARIO

Status: Offline
Posts: 4606
Date:
Permalink  
 

37 divided by 9 = 4.11111111

__________________
Bruce Rossiter


TORONTO, ONT

Status: Offline
Posts: 196
Date:
Permalink  
 

Motive Gear G882411 Ring and Pinion Set, 4.11:1 Ratio, GM 8.2 10 Bolt.

Motive Performance GM 8.20" 10 Bolt Style
Fits: 1964-1972 Car Applications
Ring Gear Diameter 8.20"
(10) 3/8" X 24 RH Threaded Bolts - Not Included
Pinion Diameter 1.438"
Cases: 3.00 & Numerically Lower, 3.08 & Numerically Higher
8620 Material - Heat Treated
Ring and Pinion Ratio - 4.11:1
Pinion Spline Count - 25
Ring Gear Teeth - 37
Pinion Gear Teeth - 9

Fits

CAMARO 67-70
CAPRICE 65-71
CHEVELLE 64-72
CHEVROLET® 65-70
CHEVY® II 64-72
EL CAMINO 64-71
IMPALA 65-72
MONTE CARLO 70-72
NOVA 64-72


__________________

What's the point of writing a response if its only going to get deleted.
shag766


FOXBORO, ONT

Status: Offline
Posts: 2237
Date:
Permalink  
 

thank you mr. rossiter. thats why we are here.         rick



__________________
if your not the lead dog-the view is all the same
shag766


FOXBORO, ONT

Status: Offline
Posts: 2237
Date:
Permalink  
 

Bruce Rossiter wrote:

Motive Gear G882411 Ring and Pinion Set, 4.11:1 Ratio, GM 8.2 10 Bolt.

Motive Performance GM 8.20" 10 Bolt Style
Fits: 1964-1972 Car Applications
Ring Gear Diameter 8.20"
(10) 3/8" X 24 RH Threaded Bolts - Not Included
Pinion Diameter 1.438"
Cases: 3.00 & Numerically Lower, 3.08 & Numerically Higher
8620 Material - Heat Treated
Ring and Pinion Ratio - 4.11:1
Pinion Spline Count - 25
Ring Gear Teeth - 37
Pinion Gear Teeth - 9

Fits

CAMARO 67-70
CAPRICE 65-71
CHEVELLE 64-72
CHEVROLET® 65-70
CHEVY® II 64-72
EL CAMINO 64-71
IMPALA 65-72
MONTE CARLO 70-72
NOVA 64-72

 for me the above info is a perfect example of what this forum and similar ones are all about. its one guy helping another guy out. another question would be whats the approxIMG_0304.JPGIMG_0305.JPGIMG_0309.JPG high-low value of this complete assembly.



-- Edited by shag766 on Tuesday 21st of May 2013 03:27:23 AM



-- Edited by shag766 on Tuesday 21st of May 2013 03:35:22 AM

Attachments
__________________
if your not the lead dog-the view is all the same
Bruce Rossiter


TORONTO, ONT

Status: Offline
Posts: 196
Date:
Permalink  
 

shag766 wrote:

thank you mr. rossiter. thats why we are here.         rick

 I'm always happy to help whenever I can.



__________________

What's the point of writing a response if its only going to get deleted.
fatstax


COBOURG, ONT

Status: Offline
Posts: 2145
Date:
Permalink  
 

you forgot to add the name of the employee who ran the machine and the day and year the ring and pinion was made



__________________
Bruce Rossiter


TORONTO, ONT

Status: Offline
Posts: 196
Date:
Permalink  
 

fatstax wrote:

you forgot to add the name of the employee who ran the machine and the day and year the ring and pinion was made

 That information should be available when I get the email back from the manufacturer. Because it was a holiday here, I'll have to wait until Tuesday.



__________________

What's the point of writing a response if its only going to get deleted.
fatstax


COBOURG, ONT

Status: Offline
Posts: 2145
Date:
Permalink  
 

Bruce Rossiter wrote:
fatstax wrote:

you forgot to add the name of the employee who ran the machine and the day and year the ring and pinion was made

 That information should be available when I get the email back from the manufacturer. Because it was a holiday here, I'll have to wait until Tuesday.

 haha i cant wait



__________________
hemi43


ONTARIO

Status: Offline
Posts: 4606
Date:
Permalink  
 

fatstax wrote:

you forgot to add the name of the employee who ran the machine and the day and year the ring and pinion was made

 $10 bucks says the employee was named Chung Lee Huan !!no



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Forum Rules (Click Here) -> Ontario Rodders -> Tech -> rear end ident


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard