Members Login
Username 
 
Password 
    Remember Me  
Forum Rules (Click Here) -> Ontario Rodders -> Tech -> Looking for spot weld cutters
Post Info TOPIC: Looking for spot weld cutters
gkent


BRANTFORD, ONT

Status: Offline
Posts: 102
Date:
Looking for spot weld cutters
Permalink  
 

I'm looking for the style of cutter shown in the photo. I have the "Blair" style but these guys do a WAY nicer job. Unfortunately they do wear out. I got this set at a swapmeet in the states and have never seen them in Ontario but that's not to say they're not available here somewhere - hopefully. Hopefully available individually since the only one worth using is the 3/8".

 

spot weld cutter.jpg

Thanks,



Attachments
__________________
slim


DUNDAS, ONT

Status: Offline
Posts: 1961
Date:
Permalink  
 

Not sure were you are  list of distributers for blair in ON

http://www.blairequipment.com/locator/canada/ontario.html

eastwood and nappa also carry them to name a few



__________________
What a long strange trip its been
gkent


BRANTFORD, ONT

Status: Offline
Posts: 102
Date:
Permalink  
 

Guess I wasn't clear that I'm not interested Blair.



__________________
slim


DUNDAS, ONT

Status: Offline
Posts: 1961
Date:
Permalink  
 

That exact brand - ebay       wurth supply  sells something some what similar



-- Edited by slim on Tuesday 10th of December 2013 12:59:33 AM

__________________
What a long strange trip its been
slab


BRANT COUNTY, ONT

Status: Offline
Posts: 1155
Date:
Permalink  
 

I used the Eastwood spot weld cutters.

www.eastwood.com/colbalt-spot-weld-cutter-kit-1-4-5-16-3-8-1-2.html

Might not be what your looking for though??

__________________

slab----67 chevy II 2dr post and 66 chevy II hardtop

plus the kids 87 Camaro and 68 SS Camaro
fatstax


COBOURG, ONT

Status: Offline
Posts: 2145
Date:
Permalink  
 

i bought the ones i am using on the camaro off ebay, cobalt, 3/8, 3 of them for about 30 bucks.  make sure you buy cobalt ones as anything less wont last, welds are pretty hard and have varying levels of hardness throughout the spot, i used up two of the three i bought on the camaro, and thats removing alot of welds



-- Edited by fatstax on Tuesday 10th of December 2013 07:57:08 AM

__________________
gkent


BRANTFORD, ONT

Status: Offline
Posts: 102
Date:
Permalink  
 

Agreed. The ones I have are titanium coated China stuff. Junk after about 100 welds. Can't complain considering the cost but I need one that's not going to die with two welds to go!

I went to the Eastwood site and they have what I'm after. Would have been nice to go to some local autobody supply and be able to buy them today though!

 

Thanks,



__________________
58Chev


ETOBICOKE, ONT

Status: Offline
Posts: 882
Date:
Permalink  
 

gkent,
Check with Frank Hawkes, Local Ontario distributor of Eastwood stuff.



__________________

 
slab


BRANT COUNTY, ONT

Status: Offline
Posts: 1155
Date:
Permalink  
 

Frank might even stock them!

__________________

slab----67 chevy II 2dr post and 66 chevy II hardtop

plus the kids 87 Camaro and 68 SS Camaro
TIME TRAVELLER


NIAGARA REGION, ONT

Status: Offline
Posts: 364
Date:
Permalink  
 

Hawkes are great people to deal with too.

__________________
THAT'S GOOD ENOUGH FOR THE GIRLS I GO WITH
hemikev


HAMILTON, ONT

Status: Offline
Posts: 1064
Date:
Permalink  
 

We have a Dura auto supply here in hamilton ,, greys road , they might have them else where in this parts of ontario ,,,i know for fact they sell them ,,,,

__________________

day to day life gets in the way
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Forum Rules (Click Here) -> Ontario Rodders -> Tech -> Looking for spot weld cutters


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard