Members Login
Username 
 
Password 
    Remember Me  
Forum Rules (Click Here) -> Ontario Rodders -> Wanted -> steering knuckles
Post Info TOPIC: steering knuckles
ElwoodBlues


SOUTHERN ONT

Status: Offline
Posts: 25
Date:
steering knuckles
Permalink  
 

also, along with a column I need a couple steering knuckles to line a newer column up with the power steering box on the Plymouth...its got an M-body clip in it with the rag joint style shaft coming out of the steering box.  I'll have to cut the shaft eliminating the rag joint.



__________________
It takes a Mopar to catch a Mopar.
shag766


FOXBORO, ONT

Status: Offline
Posts: 2265
Date:
Permalink  
 

if you get hung up for a knuckle i have used farm supply places before. some of the ag equipment had various sizes and dimensions.

__________________
if your not the lead dog-the view is all the same
ElwoodBlues


SOUTHERN ONT

Status: Offline
Posts: 25
Date:
Permalink  
 

Good to know! I have a farm supply near me, never thought of looking there.

__________________
It takes a Mopar to catch a Mopar.
Sniper


WATFORD, ONT

Status: Offline
Posts: 485
Date:
Permalink  
 

Webster's in Wyoming would likely have small u joints, another place to check out is in Petrolia at Van Tuyl and Fairbanks. (Just east of the library parking lot, cool place, like stepping back in time when you go in there. Decent prices too.)

__________________
ElwoodBlues


SOUTHERN ONT

Status: Offline
Posts: 25
Date:
Permalink  
 

Thanks...I know both places!

__________________
It takes a Mopar to catch a Mopar.
hemikev


HAMILTON, ONT

Status: Offline
Posts: 1064
Date:
Permalink  
 

Almost every chevy S10 or simular s10-s15 blazer has steering knuckles from what i understand.....

__________________

day to day life gets in the way
fatstax


COBOURG, ONT

Status: Offline
Posts: 2145
Date:
Permalink  
 

ok heres what you do, i found this idea recently.  safari or astro van, uses two universal joints and a sliding shaft, one end fits the chev steering box with the splines and the d shaped shaft, other end you cut off and make fit your column, no rag joint.  they also nice and small so no clearance issues, plus they inside a plastic sleeve so they normally nice and clean, no rust. perhaps dodge box might be made by the same supplier as gm



__________________
slim


DUNDAS, ONT

Status: Offline
Posts: 1962
Date:
Permalink  
 

 

http://grisdale.ecatviewer.com/catalog-viewer?cat=70

 

You get what you pay for Not the place to cheap out pg 103  164



-- Edited by slim on Friday 10th of January 2014 11:40:51 PM

__________________
What a long strange trip its been
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Forum Rules (Click Here) -> Ontario Rodders -> Wanted -> steering knuckles


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard