Need to pick a gear for 1/8 and 1/4 mile.
I read the SLR should be 10, but that puts my trap rpm lower than I wanted.
Why is 10 a good SLR ratio?
REBEL’s Gear selection
Trap Rear Gear RPM RPM RPM FT Traveled FT Traveled
RPM RATIO SLR 4TH@40 4TH@75 5TH@75 1ST@5000RPM @ 2500RPM
4490 3.40 9.76 1633 3061 1959 104FT 26FT
4622 3.50 10.05 1681 3151 2017 96FT 24FT
4688 3.55 10.18 1705 3196 2046 92FT 23FT
4754 3.60 10.33 1729 3241 2074 88FT 22FT
4886 3.70 10.61 1777 3331 2132 81FT 20FT
5137 3.89 11.16 1868 3502 2242 70FT 17FT
5427 4.11 11.79 1974 3700 2368 59FT 15FT
5718 4.33 12.42 2079 3899 2495 50FT 13FT
Cam power band 4,000 – 5,500
TKO600 2.87/1.89/1.28/1.00/.64
ET STREET R 28” (325-50-15 ) 11.6 face
Cal tracs
3600LBS 57 chevy
430 HP @ 5,000rpm 453 TORQUE @ 4,500rpm
-- Edited by REBEL on Monday 14th of September 2015 12:19:55 AM
Well I am thinking 4.33 OR 4.56 which is not the SLR I read about. But with my cam power curve and tunnel ram, I think I need the rev's.