Members Login
Post Info TOPIC: Manual or electric fuel pump?


Member

Status: Offline
Posts: 15
Date:
Manual or electric fuel pump?
Permalink  
 


Can I use my existing in tank fuel pump with a Edelbrock 650 carb? Orginal engine was throttle body sbc. What pressure range will I need?

Thanks



__________________

Iron-Man Welding custom fabrication and repairs.

www.iron-manwelding.ca



St THOMAS, ONT

Status: Offline
Posts: 672
Date:
Permalink  
 

Not sure,but I think that most carbs want only about 5 psi, where injected engine go about 30 psi and up.

__________________

If brains were wire, some couldn't short circuit a firefly.



Member

Status: Offline
Posts: 15
Date:
Permalink  
 

I'm thinking a pressure regulator with a bypass should work.

__________________

Iron-Man Welding custom fabrication and repairs.

www.iron-manwelding.ca



ALLAN PARK, ONT ADMINISTRATOR

Status: Offline
Posts: 3491
Date:
Permalink  
 

The GM TBI systems have less pressure than a Vortec etc, but you will still need a regulator.



__________________


Member

Status: Offline
Posts: 15
Date:
Permalink  
 

Thank you

__________________

Iron-Man Welding custom fabrication and repairs.

www.iron-manwelding.ca

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard