Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: save a few bucks


PETERBOROUGH, ONT

Status: Offline
Posts: 1176
Date:
save a few bucks
Permalink  
 


I watched a lot of youtube videos on wiring, many promoting the purchase of a portable printer to make labels BUT if you already have a desktop printer, labels for wiring is still easy. So don't buy a portable if you don't need to.  I wrote up a document listing all the things that demand wires in my ride, set the font to times new roman and the size to 12 (or maybe it was 10 ?) Then printed off the list.  Then just cut each item from the list, roll it over a wire and slide on clear heat shrink. The heat gun sealed it nicely and wire is clear and easy to read. Hope that helps somebody. On my 16 gauge, I think I can make the font a bit smaller and it is still easier to read than what came in the kit wiring.

IMG_0762.jpeg



Attachments
__________________


COBBLE HILL, BC

Status: Offline
Posts: 1609
Date:
Permalink  
 

Looks good.


__________________


PETERBOROUGH, ONT

Status: Offline
Posts: 1176
Date:
Permalink  
 

Thank you Jarvis1. It's the little things that please.

__________________


CAMPBELLFORD, ONT

Status: Offline
Posts: 1353
Date:
Permalink  
 

Time is money for most of us though, this is very little savings for a lot of trouble...

__________________

Buying selling and trading garage toys and big kid stuff.

 



COBBLE HILL, BC

Status: Offline
Posts: 1609
Date:
Permalink  
 

I've been retired for 23 years now. I have lots of time and lots of money.
I still think it is a good idea.

__________________


ONTARIO

Status: Offline
Posts: 1504
Date:
Permalink  
 

Smart tip Cuddles.


__________________


PETERBOROUGH, ONT

Status: Offline
Posts: 1176
Date:
Permalink  
 

Chris made a valid point but if we have the time, this works PLUS I found a lot of the wires in the kit were difficult to read on the different coloured wires and the font was very small. Conversely, I was able to make the font size whatever I wanted and even on different colour wires, the white paper under clear heat shrink was much easier to read. I guess the down side would be that the wire isn't labelled repeatedly along it's length. I just label the end prior to the connector but this might be worth considering for those with the time. Thank you guys.

__________________


COBBLE HILL, BC

Status: Offline
Posts: 1609
Date:
Permalink  
 

I used to install elevators. There is a multi-flex cable that can have up to or more than fifty wires in it.
18 gauge and some 14. All numbered full length. That would be handy for wiring a car.
I ended up with a "Painless" wiring kit for the '51. I think there are more wires that I will need.



__________________


NORTH BAY, ONT

Status: Offline
Posts: 439
Date:
Permalink  
 

I also used  a painless type of wiring kit for both of my builds... When I bought them I ordered a larger kit (22 or 26 circuit I believe ) just in case  I wanted to add more.

Any changes or additions I wrote down on the instruction pamphlet supplied with the kit so I know exactly what is what ...

When I sold each vehicle I handed the wiring instructions to the new owner so they know exactly what was either changed or added...no guessing and no nest of red wires under the dash.



__________________

The best way to get on your feet is to get off your ass.

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard