Members Login
Username 
 
Password 
    Remember Me  
Forum Rules (Click Here) -> Ontario Rodders -> Parts For Sale -> I Need a Fresh 350 chevy
Post Info TOPIC: I Need a Fresh 350 chevy
Cat in the Hat


BRANTFORD, ONT

Status: Offline
Posts: 2269
Date:
I Need a Fresh 350 chevy
Permalink  
 

Anyone one have a GOOD 350 for sale? Will pay Good Dollars for a Good Motor ! Call me (Glenn ) @ 416-417-5744



__________________

"If you don't pass on the knowledge you have to others, it Dies with you"
Ratmotor


PARRY SOUND, ONT

Status: Offline
Posts: 209
Date:
Permalink  
 

I have a 1973 350 2 barrel out of an Impala with only 52,000 miles on it. $350.00 here in Parry Sound.



__________________

http://www.youtube.com/user/RatmotorMike/featured
Cat in the Hat


BRANTFORD, ONT

Status: Offline
Posts: 2269
Date:
Permalink  
 

Thanks...but .....looking for something a little fresher with a little more power......something about 350 + + hp under $1500 that can be heard running.....



__________________

"If you don't pass on the knowledge you have to others, it Dies with you"
dualquadpete


BLACKSTOCK, ONT

Status: Offline
Posts: 2047
Date:
Permalink  
 

Grumpsbodyworks wrote:

Thanks...but .....looking for something a little fresher with a little more power......something about 350 + + hp under $1500 that can be heard running.....

 GOOD LUCK!!!!  Your going to have to pay GOOD $$$ for one unless you really "get lucky"  $2500 & up for that kinds power & low or no mi. on it, IMO & experience



__________________

I can only please one person a day, Today is not your day!!Tomorrow doesn't look good either !!!!
Cat in the Hat


BRANTFORD, ONT

Status: Offline
Posts: 2269
Date:
Permalink  
 

DQP  I don't mind paying for the "Right Motor" Will buy drop-in or longblock $1500 is somewhere to start....up or down not firm either way....depends on the motor....



__________________

"If you don't pass on the knowledge you have to others, it Dies with you"
flatduck


SUDBURY, ONT

Status: Offline
Posts: 1096
Date:
Permalink  
 

i have 2 ..............350 cu in but there not 4 bolt main ...........one is a target master .......the other came out of a 1970 pontiac tempest...........but is presently in my nova ...........also have all the brand new parts in boxes never been use to build a 350 to get up to 400hp............. now that i braggggggggggg enough here s my question ? will the 2 bolt main handle the hp ? or should i get a 4 bolt

__________________

hi
carta


GUELPH, ONT

Status: Offline
Posts: 127
Date:
Permalink  
 

I was at Guelph auto the other day and was asking for a coworker about a 350. One of the counter guys has a couple fresh ones for sale. I did,nt get all the details but he wanted $1500 for one and the other was more. Give him a call and check them out. His name is Gar (Garfield) 519-822-9831

__________________
RacerRick


TORONTO, ONT

Status: Offline
Posts: 634
Date:
Permalink  
 

flatduck wrote:

i have 2 ..............350 cu in but there not 4 bolt main ...........one is a target master .......the other came out of a 1970 pontiac tempest...........but is presently in my nova ...........also have all the brand new parts in boxes never been use to build a 350 to get up to 400hp............. now that i braggggggggggg enough here s my question ? will the 2 bolt main handle the hp ? or should i get a 4 bolt

 

2 Bolt is fine at that power level.  I like to throw a set of studs in 2 bolt SBC's as power gets around 400hp and up.  I have never had a failure with the bolts, but I figure the studs are cheap insurance.



__________________
Cat in the Hat


BRANTFORD, ONT

Status: Offline
Posts: 2269
Date:
Permalink  
 

Racer Rick is right...400hp on 2 bolt....no problem...and his suggestion of studs is right on.



__________________

"If you don't pass on the knowledge you have to others, it Dies with you"
flatduck


SUDBURY, ONT

Status: Offline
Posts: 1096
Date:
Permalink  
 

thanks for that special info Racerick .. and Grump ..............sure wish i could find someone to put all that engine stuff together ............

__________________

hi
RacerRick


TORONTO, ONT

Status: Offline
Posts: 634
Date:
Permalink  
 

And buy good quality studs - I like ARP, or Milodon. Some of the cheap chinease ones are not heat treated properly.

And while you are at it, might as well get the studs with the standoffs for the windage tray :)


__________________
Cat in the Hat


BRANTFORD, ONT

Status: Offline
Posts: 2269
Date:
Permalink  
 

Thanks to all that replied....

Found a rebuilt 283 with a 327 crank.... 302....tada

fair price at rockton on the weekend.

 



__________________

"If you don't pass on the knowledge you have to others, it Dies with you"
RacerRick


TORONTO, ONT

Status: Offline
Posts: 634
Date:
Permalink  
 

Thats a 307, not a 302. Good little motors if its been rebuilt properly - original 307s had camshaft issues.

307 - 3.875" bore, 3.25" stroke (283 bore, 327 stroke)
302 - 4" bore, 3" stroke (327 bore, 283 stroke)


__________________
Cat in the Hat


BRANTFORD, ONT

Status: Offline
Posts: 2269
Date:
Permalink  
 

Picky Picky Picky.....

Really 40 thou bore 283 +327 crank = 311

Been built right...

Full roller....air gap intake....650 holly mechanical....MSD....forged internals

Should be a screemer.....



__________________

"If you don't pass on the knowledge you have to others, it Dies with you"
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Forum Rules (Click Here) -> Ontario Rodders -> Parts For Sale -> I Need a Fresh 350 chevy


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard