Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: My Latest Electrical Question - Door Poppers


COURTICE, ONT

Status: Offline
Posts: 367
Date:
My Latest Electrical Question - Door Poppers
Permalink  
 


I decided to have a look at the door popper today. Wasn't working when I bought the truck. Turns out simple as just finding where all the bad connection were and soldered everything. Works fantastic now..... EXCEPT it pops the door open when you start the truck.It doesn't pop the door when you turn the ignition on, only when you actually crank it. Any idea what why that might be?

I'm also not a fan of this door popper. The hidden button on the truck is a momentary switch I think so it works nice - push the button the actuator pops and then goes back to the neutral position but the key fob is two buttons, Open/Close. So when you use the key fob the actuator stays up or down depending which button you push. Kinda stupid.

Anyways I'm more concerned about the door popping when you crank the motor!



__________________


BRANTFORD, ONT

Status: Offline
Posts: 2269
Date:
Permalink  
 

Id check tge starter wire isnt tied into your receiver box

Dumb but id start there

Also 2 buttons to open and close a door?

Never done that before

1 button to open each door. Only

Just sayin

__________________

"If you don't pass on the knowledge you have to others, it Dies with you"



COURTICE, ONT

Status: Offline
Posts: 367
Date:
Permalink  
 

yup it's dump.

Ok sounds good. Thanks I'll see what's tied into it.
There' 2 other wires into the same slot in the fusebox gotta figure out where they go.



__________________


CAMPBELLFORD, ONT

Status: Offline
Posts: 1338
Date:
Permalink  
 

Add a return spring to the actuator Nick ,it will return to the closed position this way... As for the door popping when it starts' seems like they have too many wires connected and the is a function built in to the remotes they chose that powers as you fire up, possibly was an auto lock or unlock option?

__________________

Buying selling and trading garage toys and big kid stuff.

 



COURTICE, ONT

Status: Offline
Posts: 367
Date:
Permalink  
 

well the hidden button functions correctly, it returns to the closed position. It's the key fob popper, it's something pretty generic looking, just a remote with two buttons ON/OFF. On locks it into open, off locks it into closed. The receiver unit doesn't have a single marking on it of any kind, just a black box.
That's not a big concern right now though, more curious about the popping during starting. That's what I wanna figure out first.

__________________


NIAGARA REGION, ONT

Status: Offline
Posts: 308
Date:
Permalink  
 

Some remotes have two settings. a 4 button remote has # 1 and 2 which are used to turn things on an off, 1 push turns it on, second push turns it off, that is to use remote for fog lights or alarms. buttons # 3 and 4 are momentary for door poppers. If your remote is set up to turn on and off, it might just be easier to replaced it with one that has momentary control. if you have the instructions, there may be different wires coming off the receiver. If not Princess Auto has a 4 button unit. they go on sale periodically for about $20...........

as for the open when starting, sounds like a crossed wire, or the antenae for your remote may be picking up static from the starter,,,,,,,,,,which would be extremely rare.

__________________
DavyJ


COURTICE, ONT

Status: Offline
Posts: 367
Date:
Permalink  
 

Hey DavyJ, thanks for the reply.. It was a remote with just 2 buttons. On/OFF... So I just removed the unit. Problem solved. lol
I realized I don't really need to open my door before I get to the truck, and don't need another piece of junk hanging off my key chain.

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard