Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Turbo 350 pains


New Member

Status: Offline
Posts: 3
Date:
Turbo 350 pains
Permalink  
 


I am hoping someone can help me as I have read through most related post and not found any answers. I have a 350 with a th350. I did a quick tune up and afterwards the transmission would not go into any gear. I checked the vacuum line and the shift linkage. Also checked the fluid with it warm and level and if anything is high (not low). Next thought is to drop the fluid and replace.
What am I missing or what did I cook??

Thanks

 



__________________


ADMINISTRATOR

Status: Offline
Posts: 3872
Date:
Permalink  
 

Probably just a coincidence that this happened when you did the tune up......Is the fluid a nice pink colour?...Does it smell burnt?

__________________


PORTLAND, ONT

Status: Offline
Posts: 262
Date:
Permalink  
 

HI MIKE : You said you checked the vacuum lines -- I had the identical thing happen because I had jarred the vacuum line off at the trans end and it would only run in 1 st gear ( very frightening , but a quick fix ) -- Hope this helps -- LATER -- DON / fleet 51

__________________


COBOURG, ONT

Status: Offline
Posts: 1393
Date:
Permalink  
 

same as fleet 51.

__________________

There are 106 miles to Chicago. We have a full tank of gas, half a pack of cigarettes, it's dark, and we're wearing sunglasses.



New Member

Status: Offline
Posts: 3
Date:
Permalink  
 

Fluid does seem pink and odourless (except for the oil smell). I will check the trans end for the vac line.

Thanks



__________________


BUCKHORN, ONT

Status: Offline
Posts: 687
Date:
Permalink  
 

if you've got low gear only, i'd definitly check vacuum line/modulator valve. and if it isn't a linkage issue then it's likely internal, and, as harry said, just coincidental to the tune up.



__________________

don't walk in like you own the place..........walk in like you hold the mortgage.



EASTERN ONTARIO

Status: Offline
Posts: 40
Date:
Permalink  
 

If you have low gear only and vacuum, check the governor gear. They are nylon like a speedo gear and wear out.

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard