Members Login
Username 
 
Password 
    Remember Me  
Forum Rules (Click Here) -> Ontario Rodders -> Tech -> Mustang II front suspension and certification
Post Info TOPIC: Mustang II front suspension and certification
Johnnee D


OAKVILLE, ONT

Status: Offline
Posts: 25
Date:
Mustang II front suspension and certification
Permalink  
 

I found a car in Alberta, 52 Chey with a Mustang II style front suspension. If I bring it back to Ontario will I have any problems with certification? Anything special I should check?

thanks

JD



-- Edited by Johnnee D on Saturday 14th of February 2015 01:06:55 PM

__________________
Lightspeed Mike


BELLEVILLE, ONT

Status: Offline
Posts: 959
Date:
Permalink  
 

As long as it's well done, I don't see a problem.


__________________

Custom CNC plasma cutting. PM me for your custom parts.

www.lightspeedmetaldesign.com
51 Styline


NIAGARA FALLS, ONT

Status: Offline
Posts: 713
Date:
Permalink  
 

I have a 51 Chev with a Mustang 2 front suspension . As long as the welds are solid and everything is solid and tight you should have no problems. Mine passed with no problems.

__________________
slim


DUNDAS, ONT

Status: Offline
Posts: 1961
Date:
Permalink  
 

 If the car will pass inspection there there is no reson that it wouldnt  here. Id be more concered that the paperwork is in order and there is a clear readable serial number. some provences don't have ownerships for vehicles over 25 years old . but the guy on this end is going to want to be able to see some number that says that is the car he looked at.                                                                                                                                             



__________________
What a long strange trip its been
Sacotu


COBOURG, ONT

Status: Offline
Posts: 1393
Date:
Permalink  
 

a friend has a 50 chev and the whole front end unbolted from the frame and he is going to buy a mustang style that bolts in. is this that type?

__________________

There are 106 miles to Chicago. We have a full tank of gas, half a pack of cigarettes, it's dark, and we're wearing sunglasses.
studeshaker


BUCKHORN, ONT

Status: Offline
Posts: 687
Date:
Permalink  
 

there is a mustang 2 front on my studebaker and it passes tech at the dragstrip. lol.



__________________

don't walk in like you own the place..........walk in like you hold the mortgage.
jarvis1


COBBLE HILL, BC

Status: Offline
Posts: 1500
Date:
Permalink  
 

Maybe the inspector would not know what type suspension it is.
There are situations where any new welds on a car have to be stamped with the welders number.
Does that happen there?

__________________
parklane


St THOMAS, ONT

Status: Offline
Posts: 720
Date:
Permalink  
 

Ontario is not like some other provinces where you need to get an engineer to certify it, and you want to hope that they never do. A guy on Canadian Rodders site that was required to build a complete new frame, cuz the engineer wouldn't certify his IFS Stude.

__________________

If brains were wire, some couldn't short circuit a firefly.
Johnnee D


OAKVILLE, ONT

Status: Offline
Posts: 25
Date:
Permalink  
 

Thanks everyone, as long as the welds are good it should be no problem then...
cheers
JD

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Forum Rules (Click Here) -> Ontario Rodders -> Tech -> Mustang II front suspension and certification


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard