Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Dual Exhaust Inline 6 - Split Manifold or Headers


HAMILTON, ONT

Status: Offline
Posts: 27
Date:
Dual Exhaust Inline 6 - Split Manifold or Headers
Permalink  
 


I am considering options for an upcoming engine swap. I want to add dual exhaust to a 235 Chevy I6. I like the look of a split manifold, but I'm concerned it won't flow well enough. I also don't have the ability to weld cast iron so I'd have to find a shop to do it. Of course, I could bolt on Fenton headers and be done with it. but what would be the fun in that? What do you think?



__________________


S/W ONTARIO

Status: Offline
Posts: 636
Date:
Permalink  
 

There are enough disappointments in life without going looking for them.

Buy a manufactured piece and be done with it.

That being said I know a guy just outside of London that wheels and deals in inline stuff.

Also I think Oakdale Garage has two new glass packs for sale cheap.

TMJ



-- Edited by toomuchjunk on Friday 22nd of May 2015 06:49:32 AM

__________________

"Good cowgirls keep their calves together"



PRINCE EDWARD COUNTY, ONT

Status: Offline
Posts: 1279
Date:
Permalink  
 

Can't seem to grab the picture but check out this flange. I bought one last year but not sure if I am going to use it since I just picked up the original set of Fentons. Nicely finished piece.

www.hellsgatehotrods.com/flanges/exhaust-header-flanges/chevrolet-early-6-cyl-216-261-exhaust-intake-flange/

Warren

__________________
You can only make it better


DUNDAS, ONT

Status: Offline
Posts: 1961
Date:
Permalink  
 

Fenton's will need spacers  welded to the cross brace tab or they won't tighten properly. Langdon sells William's and the must have Mini HEI. Also you are going to need to heat the intake somehow. I have a couple old manifolds that I am  more then willing to give you if you want to knock yourself out. In fact I have a truckload of old 235 stuff headed for scrap This week . 6 or 700 pounds worth . 50 bucks and you can take what you want and scrap the rest.



__________________
What a long strange trip its been


HAMILTON, ONT

Status: Offline
Posts: 27
Date:
Permalink  
 

slim wrote:

Fenton's will need spacers  welded to the cross brace tab or they won't tighten properly. Langdon sells William's and the must have Mini HEI. Also you are going to need to heat the intake somehow. I have a couple old manifolds that I am  more then willing to give you if you want to knock yourself out. In fact I have a truckload of old 235 stuff headed for scrap This week . 6 or 700 pounds worth . 50 bucks and you can take what you want and scrap the rest.


 

That sounds like a great deal to me. I already have a couple things on my watch list. Thanks for the offer.

One of the reasons I like the split manifold is that it bolts to the intake and negates the need to plumb water or exhaust lines for heat. A nicely split manifold has an aesthetic that can't be topped by headers IMO. It might be worth trying to split a scrap manifold. If it doesn't work out I can always buy headers.

Thanks for the replies.



__________________


CAMPBELLFORD, ONT

Status: Offline
Posts: 1315
Date:
Permalink  
 

I agree with TMJ, for the amount of work taking the manifold on and off every time you find a split in the weld,it's well worth the money to buy a set of Fentons!

__________________

Buying selling and trading garage toys and big kid stuff.

 



HAMILTON, ONT

Status: Offline
Posts: 27
Date:
Permalink  
 

I thought I'd give an update on my manifold situation. I picked up some 235 parts including a couple scrap manifolds from Slim this summer. I finally got around to splitting the manifold today. My friend, who is a licensed welder, did the welding. He used high nickel rods that I bought at Praxair. The job took the better part of day. Most of the time was spent waiting on the manifold to cool in a wheel barrel full of sand. We sand casted some boat parts out of aluminium while we waited. I still have lots of work to do to it, but I'm pretty happy with the results. Thanks again for the parts, Slim.

image_9.jpeg

image_10.jpeg

image_11.jpeg

 



__________________


HAMILTON, ONT

Status: Offline
Posts: 27
Date:
Permalink  
 

I also got the new motor in the car this week. The motor is a 1954 235 bored .030" over with an Isky cam, solid lifters, hardened seats and a shaved head. I bought it from a guy who's project fell through. It's not much of a hot rod, but she's mine.

image_8.jpeg

image_7.jpeg

 



__________________


S/W ONTARIO

Status: Offline
Posts: 636
Date:
Permalink  
 

wbeaton said

""It's not much of a hot rod, but she's mine.""

-------------------------------------------------------------------------------------------------------------------

I'm sure I'm saying what a lot of other guys are thinking.

Don't waist your time on that thing!!

I'll bring my trailer and pick it up in the morning!!!

Seriously though it looks pretty damn cool to me.

Enjoy it,, like you said it's yours.

I had a inline Pontiac as a first car an still have lots of fond memories of it.

TMJ 

 



__________________

"Good cowgirls keep their calves together"



DUNDAS, ONT

Status: Offline
Posts: 1961
Date:
Permalink  
 

54 is a  transition year your water pump is good watch for tooth count on the flywheel also the distributor drive gear .early 54 used a forged cam with a narrow drive gear distributer gear will be hardened(hard to mark with a file) late 54 cast cam with wide drive .... cast gear (easily marked) not sure what the Isky is. ..... looking good



__________________
What a long strange trip its been


HAMILTON, ONT

Status: Offline
Posts: 27
Date:
Permalink  
 

Thanks for the kind words. I used the clutch and distributor from a 1960 235. I converted to 12V when I got the car so used the flywheel from the 1960 in my 1951 bell housing and with a 1956 starter. Everything seems to match well. The motor came with a newer style HEI, which I'm sure is better than the distributor and Pertronix that I'm using, but I couldn't take the look of it. The distributor gear appeared to be the same. Both are bigger than the 216 gear.

 

image_12.jpeg



__________________


DUNDAS, ONT

Status: Offline
Posts: 1961
Date:
Permalink  
 

I have to agree . it doesn't look right  . The Langdon mini is a much better choice although a bit taller it doesn't stick out lick a lump

hei_mini.jpg

 

http://www.stovebolt.com/techtips/HEI_mini.html



__________________
What a long strange trip its been


PORTLAND, ONT

Status: Offline
Posts: 262
Date:
Permalink  
 

HI WAYNE : " Back -in-the-Day " , we used to take a thermostat housing ( 216 / 235 ) , turn it upside down and weld it to the side of the cast manifold , exactly where your's is welded . My current 250 runs headers . I had a split-six in 1958/1959 in Woodstock , Ont ---- Holy Crap , Am I THAT OLD !!---- LATER -- DON / Fleet 51

__________________


HAMILTON, ONT

Status: Offline
Posts: 27
Date:
Permalink  
 

It's funny you say that, Don. I considered using a spare thermostat housing when I noticed how much it looked like my exhaust flange. If I ever do it again I'll try it with the housing.

I grew up in Sydenham. I used to pass through Portland all the time when we were teenagers with nothing to do except drive around. That was 25 years ago.



__________________


PORTLAND, ONT

Status: Offline
Posts: 262
Date:
Permalink  
 

HI WAYNE : Thanks for the reply . Interesting how shop-talk can end up being a little trip down memory lane -- Thanks again -- LATER -- DON / Fleet 51

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard