Members Login
Username 
 
Password 
    Remember Me  
Forum Rules (Click Here) -> Ontario Rodders -> Tech -> motor painting
Post Info TOPIC: motor painting
Marten


RICHMOND, ONT

Status: Offline
Posts: 261
Date:
motor painting
Permalink  
 

I would like to paint my engine block gloss red.  I see there is high temp paint at Canadian Tire, made by VHT.  When I look at the instructions it is all very normal stuff, clean first, light coats of paint, etc.  It then says to cure it at 300 degrees for 2-3 hours.  How are you to do that and is it important? 



__________________
poncho62


ADMINISTRATOR

Status: Offline
Posts: 3828
Date:
Permalink  
 

In the wifes oven?....not too likely

I have had good luck stating the engine and letting it run a few minutes, shut off and cool down....Do that a few times.

__________________
toomuchjunk


S/W ONTARIO

Status: Offline
Posts: 637
Date:
Permalink  
 

Cleaning it is the big thing more so then the painting,,,,,,,IMO



__________________

"Good cowgirls keep their calves together"
Smokin Joe


ONTARIO

Status: Offline
Posts: 677
Date:
Permalink  
 

I have a degreaser spray gun I fill with mineral spirits with 40psi comes out like new. But first disconnect the battery.

__________________

Yes they are all crazzzy but me and you........... and I am not sure about you!!!!
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Forum Rules (Click Here) -> Ontario Rodders -> Tech -> motor painting


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard