Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Need advice regarding trim pieces on 62 Nova


WATERFORD, ONT

Status: Offline
Posts: 94
Date:
Need advice regarding trim pieces on 62 Nova
Permalink  
 


Guys I have a 62 Chevy 11 Nova, the trim pieces I am talking about go on the doors right beside the window where your arm would rest if you had it out the window and on the small window in the passenger area same place, The pieces I have now are in nice shape and have polished up perfectly but the problem I have is there looks to be a strip of rubber that sits underneath it , one piece of trim has a little bit of this rubber remaining while the other pieces the rubber is missing, any ideas where I can find this rubber strip that goes in there . If anyone has any ideas, thoughts, advice or can help me out I would greatly appreciate it, thanks. I have a couple pictures attached that might help out.



Attachments
__________________


PRINCE EDWARD COUNTY, ONT

Status: Offline
Posts: 1279
Date:
Permalink  
 

Have you tried Steele Rubber Products? www.steelerubber.com/

Warren

__________________
You can only make it better


LONDON, ONT

Status: Offline
Posts: 672
Date:
Permalink  
 

Try CARS Inc. in Birmingham Mi carsinc.com/1963-1979-nova.html

__________________


BRANT COUNTY, ONT

Status: Offline
Posts: 1155
Date:
Permalink  
 

Try these guys chevy II only in KY

http://www.chevynova.com/home.php



__________________

slab----67 chevy II 2dr post and 66 chevy II hardtop

plus the kids 87 Camaro and 68 SS Camaro



RICHMOND, ONT

Status: Offline
Posts: 261
Date:
Permalink  
 

That wouldn't be a two way tape of some sort would it?

__________________


CLINTON, ONT

Status: Offline
Posts: 3909
Date:
Permalink  
 

Trim on 62 Nova 1.jpg

Trim on 62 Nova 2.jpg

 



Attachments
__________________

 

 



WATERFORD, ONT

Status: Offline
Posts: 94
Date:
Permalink  
 

Think I have found out a little more, by the looks of it the fellow that built that car has used the wrong weather stripping, there is a weather strip that will fit into the trim and there are tabs on the trim that hold it in place and then goes through the door and more tabs that lock it in place, still trying to find this weather stripping but think it should be out there someplace. Thanks for all the help and leads, appreciate it, will keep looking to find what I need soon I hope.

__________________


KAWARTHA LAKES

Status: Offline
Posts: 22
Date:
Permalink  
 

You need a weatherstripping kit ; it will have the fuzzies for the inside and rubbers for the outside that attach to those reveal moldings.

Here's an example:

http://www.parts123.com/parts123/yb.dll?Parta~ShowPicTxt~Z5Z5Z50000132a~Z5Z5Z5AADYK~Z5Z5Z51  

These are widely available from most restoration suppliers.


Try antique chevrolet; they are in dundas ontario.

FYI; the repop rubbers are horrible no matter where you get them from . The rubber is too hard and you'll find every time you roll up your windows they will lift the moldings off the door or qtr panel.
Some people trim the rubber, some add screws to help hold the moldings on.
The bottom line is there is nothing any better available.



-- Edited by shawn63 on Thursday 10th of March 2016 09:43:41 AM

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard