Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Wanted to buy...Inboard outboard boat for donor engine


WATERLOO, ONT

Status: Offline
Posts: 103
Date:
Wanted to buy...Inboard outboard boat for donor engine
Permalink  
 


looking for a good running complete inboard outboard boat....I need the complete driveline as donor for an old boat I am restoring.....condition of Hull  or Interior can be scrap

40042186_10156565593215350_5189655227669676032_n.jpg



Attachments
__________________


WEST PERTH, ONT

Status: Offline
Posts: 331
Date:
Permalink  
 

Might have something. 6 cyl chev runs like a champ. The impeller in the prop thing must not be working because it overheats and cracks the exhaust manifolds. (not pumping the water up) Dude had it a Searay place and they didn't make sure it was pumping water.

Maifolds were welded and ready to go, but they didn't even put the muffs on to make sure.

Lots of new stuff on it. I did the engine. I'm guessing about a 25' boat.

Interior is pretty nasty, but top is good etc, and on a trailer gtg.

I'll confirm he still has it and let you know. Might even have some pics of it here.

B





__________________


BLACKSTOCK, ONT

Status: Offline
Posts: 2047
Date:
Permalink  
 

I know of another one sitting in field,just around the corner, merc cruiser D/line did run when parked there a "few" years ago??? good scrub would likely bring it back, covered in mould now. Can check to see what he wants for it??? Pete

__________________

I can only please one person a day, Today is not your day!!Tomorrow doesn't look good either !!!!



WEST PERTH, ONT

Status: Offline
Posts: 331
Date:
Permalink  
 

Shoppics 349.jpgShoppics 348.jpgShoppics 353.jpgHere's pics. I'll let you know when I hear back from him.



Attachments
__________________


WEST PERTH, ONT

Status: Offline
Posts: 331
Date:
Permalink  
 

Awrighty then. He's looking for $1100 with trailer.

It's a V6 chev. New starter, alt/gen and all the solenoids (4 or 5) that run the steering and prop lift/throttle etc.

Just the impeller thingy to pump the water to the engine. Exhaust manifolds are prolly cracked again. Welded them once already.

Make a reasonable offer if interested cause I know he won't do anything else to it again.





__________________


ONTARIO

Status: Offline
Posts: 677
Date:
Permalink  
 

Where can you scrap old fiberglass boats after they have been stripped? I see them sitting in fields and have been wondering when they will pass a bylaw like they have for derelict cars.

__________________

Yes they are all crazzzy but me and you........... and I am not sure about you!!!!

77


BARRIE, ONTARIO

Status: Offline
Posts: 1395
Date:
Permalink  
 

I scrapped a 18 ft glass boat , stripped , took it to city dump and dropped it off , but that was like 30 yrs ago . But have no idea what you,d have to do now

__________________

I,m as cool as Milner , but axeually a bit more like Beckwith



BLACKSTOCK, ONT

Status: Offline
Posts: 2047
Date:
Permalink  
 

Sawz all !!! Make it into chunks you can handle & to the dump or transfer station!!!

__________________

I can only please one person a day, Today is not your day!!Tomorrow doesn't look good either !!!!



WATERLOO, ONT

Status: Offline
Posts: 103
Date:
Permalink  
 

Thanks Man....sorry for late reply.....where is that boat located?



__________________


WEST PERTH, ONT

Status: Offline
Posts: 331
Date:
Permalink  
 

I'm just south of Mitchell and can have it here no problem. It's currently sitting at buddies cottage/house thing, but he's there all the time and will bring it down from Tuckistan Siberia.

It's exactly as the pictures I posted cause I saw him the other day and asked about it again.

Like I said, it is a nice boat but needs some love. I bet $900 would take it, between us.

Pretty sure I repacked the trailer wheel bearings when it was here.

Almost positive it has a beer holder or 10.

Just remembered I replaced the motor that lifts the whole prop/out-thing too.





__________________


WATERLOO, ONT

Status: Offline
Posts: 103
Date:
Permalink  
 

I was looking at costs of manifolds.....almost a 1000 dollars.....and if the engine got hot enough to keep cracking manifolds sounds like it has possible other concerns...guess I pass

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard