Members Login
Post Info TOPIC: I know there are some Inliners here.....


ONTARIO

Status: Offline
Posts: 1343
Date:
I know there are some Inliners here.....
Permalink  
 


Very interesting video : https://www.youtube.com/watch?v=HKIjsXUMvhc

 





-- Edited by poncho62 on Thursday 25th of November 2021 06:05:55 PM

__________________


PRINCE EDWARD COUNTY, ONT

Status: Offline
Posts: 1149
Date:
Permalink  
 

And I thought my 261 was exotic!
Warren

__________________
You can only make it better


ONTARIO

Status: Offline
Posts: 1343
Date:
Permalink  
 

Pretty wild eh Warren?

__________________


PRINCE EDWARD COUNTY, ONT

Status: Offline
Posts: 1149
Date:
Permalink  
 

 

Probably at least $100/horse but what awesome workmanship.

I have been trying to find a Wayne head for years. There were a couple of scams on-line and I found a rough casting but no machining instructions.  This setup has been touted on European sites over the years but as far as anyone can tell, it is a hoax.  I tried unsuccessfully to contact him for six months.  I was prepared to fly to Ireland to retrieve it.

Warren

12 port.jpg



-- Edited by wuga on Thursday 25th of November 2021 05:40:02 PM

Attachments
__________________
You can only make it better


ONTARIO

Status: Offline
Posts: 1343
Date:
Permalink  
 

I found your problem Warren, you're building the wrong motors......www.youtube.com/watch

__________________


BELLE EWART, ONT

Status: Offline
Posts: 83
Date:
Permalink  
 

My 302 GMC
Robertson_354_engL.jpg



-- Edited by Hotrodron on Tuesday 7th of December 2021 09:37:18 PM

Attachments
__________________

35 Chev master sport coupe

302 GMC



ONTARIO

Status: Offline
Posts: 1343
Date:
Permalink  
 

SWEET Ron. 292 bored 060" ? It's beautiful.

__________________


St THOMAS, ONT

Status: Offline
Posts: 719
Date:
Permalink  
 

I think that some GMCs were actually 302cuin.

__________________

If brains were wire, some couldn't short circuit a firefly.



PRINCE EDWARD COUNTY, ONT

Status: Offline
Posts: 1149
Date:
Permalink  
 

That 302 is a completely different engine then the Chev Gen 1 216/235/261 or the Chev Gen 2 192/230/250/292. It was a GMC exclusive and came in about 12 different sizes over the years.

Warren

__________________
You can only make it better


COBBLE HILL, BC

Status: Offline
Posts: 1407
Date:
Permalink  
 

A friend in the east end of Hamilton had a Wayne head.
Some of the early stock car racers had them.
But that was 60 years ago or more.
Probably still out there somewhere.

__________________


ONTARIO

Status: Offline
Posts: 1343
Date:
Permalink  
 

Thanks for the clarification fella's. That's what I like about this site, LOTS of knowledgeable guys.

__________________


PORTLAND, ONT

Status: Offline
Posts: 257
Date:
Permalink  
 

I am no longer a member of Ontario Inliners , but my '51 is definitely powered by an Inline . It's a 250 , considerable head work ( not lump ports ) and a moderate cam , Offy intake , Langdon headers , 5 speed & 3:42 gears . It pulls like a train. Gets ridiculously good fuel economy , runs all day with the Big Dogs -- Which is why it now has 17000 Miles on it in less than 10 years .( even with covid restrictions !) - Don't think for one moment that you " Have to have a V-8 to get down the road " -- Not so !! -- DON / Fleet 51

__________________


PORTLAND, ONT

Status: Offline
Posts: 257
Date:
Permalink  
 

Jarvis & Wuga : As recently as 4-5 years ago , there were two 12 port heads in S/W Ontario -- DON / Fleet 51

__________________


FOXBORO, ONT

Status: Offline
Posts: 2053
Date:
Permalink  
 

wuga wrote:

 

Probably at least $100/horse but what awesome workmanship.

I have been trying to find a Wayne head for years. There were a couple of scams on-line and I found a rough casting but no machining instructions.  This setup has been touted on European sites over the years but as far as anyone can tell, it is a hoax.  I tried unsuccessfully to contact him for six months.  I was prepared to fly to Ireland to retrieve it.

Warren

12 port.jpg



-- Edited by wuga on Thursday 25th of November 2021 05:40:02 PM


 Warren, if you get the itch to go to Ireland to p/u a car part let me know would ya. i would like to go also just to play a couple of golf course's and visit the mother land.



__________________
if your not the lead dog-the view is all the same


ONTARIO

Status: Offline
Posts: 1343
Date:
Permalink  
 

shag766 wrote:
wuga wrote:

 

Probably at least $100/horse but what awesome workmanship.

I have been trying to find a Wayne head for years. There were a couple of scams on-line and I found a rough casting but no machining instructions.  This setup has been touted on European sites over the years but as far as anyone can tell, it is a hoax.  I tried unsuccessfully to contact him for six months.  I was prepared to fly to Ireland to retrieve it.

Warren

12 port.jpg



-- Edited by wuga on Thursday 25th of November 2021 05:40:02 PM


 Warren, if you get the itch to go to Ireland to p/u a car part let me know would ya. i would like to go also just to play a couple of golf course's and visit the mother land.


 Our daughter went back before she got married, she and a couple girlfriends. She found a bunch of relatives which was pretty cool. I'd like to see the place m'self some day before I croak.



__________________


ONTARIO

Status: Offline
Posts: 1343
Date:
Permalink  
 

On the subject of inliners, our youngest guy has been giving some thought to installing the 4.2 Vortec from his brothers Olds SUV into his '76 Ventura. Hang a 5 spd off the tail end. Might make for an interesting ride.

__________________


PRINCE EDWARD COUNTY, ONT

Status: Offline
Posts: 1149
Date:
Permalink  
 

You can get crazy horse power from those 4.2 inlines, but at a crazy price. I have often thought about one in the Bantam, but then it isn't nostalgic and my better half thinks I may have spent enough on it. Would be awesome in the Ventura. 900 HP!

Warren

__________________
You can only make it better


ONTARIO

Status: Offline
Posts: 1343
Date:
Permalink  
 

wuga wrote:

You can get crazy horse power from those 4.2 inlines, but at a crazy price. I have often thought about one in the Bantam, but then it isn't nostalgic and my better half thinks I may have spent enough on it. Would be awesome in the Ventura. 900 HP!

Warren


 I totally agree



__________________


BELLE EWART, ONT

Status: Offline
Posts: 83
Date:
Permalink  
 

my engine is a GMC 302 bored .125 to make it 320 cid

 

GOPR2555.JPG



-- Edited by Hotrodron on Sunday 12th of December 2021 04:08:59 PM

Attachments
__________________

35 Chev master sport coupe

302 GMC



ONTARIO

Status: Offline
Posts: 1343
Date:
Permalink  
 

so cool


__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard