Introductions

ABOB · ABOB

Hi everyone iam new to this message board , so i thought i should tell you all a little about my self . I have built cars quite a few cars over the years everything from 1966 f100 on airbags to my old a trusty 1929 model A . I work at a local tire shop that does every thing from lawnmower tire to large tractor...

58Chev · 58Chev

It has been quite a number of years since being here. Most of you know who I am. Had to create a new account. 58 Chev Delray, have owned it for around 15yrs. Recently replaced the chassis with a solid one that was not rusted through. [img]https://i.img...

Chad · Chad

Hey guys its been long while.. I haven't been on here in a long time.. lots of new names I see.. The long time members might remember me.. my name is Chad. I am from guelph.. certified car nut for sure.. I have built and owned a ton of cars. I get the hot rod disease from my father who has been building hot rods...

Iron-Man · Iron-Man

Hey everyone. New to the forum. Working on my first rod. 92 sierra step side. Engine is in, brand new 383 stroker. Have some bugs to work out. Hoping to gain lots of knowledge from this site. -- Edited by Iron-Man on Saturday 25th of May 2019 07:56:14 PM

pistinbroke · pistinbroke

Thought it might be a better idea to post a reintroduction since it seems to be four or so years since I was here last...... How time flies. Anyhow, my dads 50 Merc pick up is very close to road worthy (22 yrs of on and off building) and the trade off 55 is getting close as well. Currently we are planning a trek...

GLHS60 · GLHS60

Hello all!! New member from Sherwood Park Alberta and first post from a long time car guy. I joined to keep tabs on my cousin Carl Hicks and see what's going on in the rest of Canada. I've had many cars over the years but have settled down to a 1986 Dodge Omni Turbo and a 1984 Rampage. I Bought the Omni new Feb 2...

Wiggsy72 · Wiggsy72

I grew up in Ontario, half in Scarborough and the other half in Orillia. Then I made a trip out west to BC and stuck around. I’m searching for a 60’s Ford Econoline I built with my dad back in the 90’s. It’s Viper red with Weld wheels, door poppers, 350 Chev, tubbed, Ford 9” rear, all new glass and rubber. It w...

Doug · Doug

Just wanted to introduce myself, I've just mostly finished(95% done) my 55 chevrolet 2dr sedan. My wife and I are hoping to put some miles on the car and attend a few of this year's events. Maybe we see some of you out there. Doug

New member from Waterdown · BigOldChryslers

Hi guys, my name is Mike. I just joined the forum. I own a couple 1966 Chryslers, but I like old-school rods, customs and finned cars too. Here is my Newport convertible. Originally a California car. I tried to post pictures of my Windsor 2-door hardtop also, but the system said my post was too long. I to...

Iwannagofast · 300

Hello, glad to be able to join. Working on a 55 Sedan Delivery. Got a 70 AAR Cuda, 65 Satellite, 69 Chevelle -- Edited by poncho62 on Thursday 13th of December 2018 07:18:13 AM

Brendan · Brendan

I was on here a few years ago but forgot my username so re-registered with my real name. Hard to forget that,lol. Right now my cars are a 61 Impala and a 76 Buick Skylark.

Ron · Ron

I just wanted to say hello and a early Merry Christmas & Happy New year to every one I have been on this sight for a few months great site I am building a 1927 T roadster on a 1928 A frame in my back yard I gathered all my parts from around Ontario I started from scratch its coming along just wondering if th...

Thumpp · Thumpp

Hey everyone I am new here. I have been into cars, trucks and motorcycles my whole life, 57 years now. My wife and I own a 1964 El Camino, 2002 Mustang GT convertible, lowered 2011 HHR panel,1978 Harley Lowrider,1982 Harley Superglide and a 2016 Jeep for the winter..I am retired and I spend most of my tim...

Nunner123 · Nunner123

I am from the Hespeler end of Cambridge and I have been working on cars for the last 30 years in my shop. My daily driver is a 1976 F350 and my hotrod is a flat black pro street 1929 Pontiac coupe. I have a few projects on the go and I will post pictures when I have a moment. Glad to be part of the Ontario car scene a...

Mattmctree · Mattmctree

I'm from norfolk county . I've got a 65 nissan patrol that i would like to fix up. I've got a young family and don't get a tons of extra time but hopefully when my son is old enough he can help me

rustryder · rustryder

Thank you so much for allowing me on this site.I enjoy one like it here in the states its called the hamb.I have been hooked on cars for a long time.My father was a mechanic and he and I would be at his shop building our first hot rod together .It was a fiberglass t-bucket I was 12 years old when we started it.W...

Northern 52 · Northern 52

Hello from Sudbury in the great white north. I've been working on a 1952 (registered) (doors and cab are more like a 1950) Chevy pickup for a couple of years now. I bought all of the sheet metal from a friend who had the truck shipped from Saskatchewan about 10 years ago It was supposed to be his retirem...

Ken · Ken

Hey guys and gals Just finished up a small restoration on my 1925 dodge 3 window. We had to weld in a new floor, then rhino lined the entire interior. Brand new Ford 9" rear end (Hated that) also put on disc brakes front and rear for more safety. Added 13 gallon fuel cell, Led lighting for headlights an...

CanadianDodgeTrucks · CanadianDodgeTrucks

Hello all, First time poster and I am looking at building a truck from the front clip of a 1954 Fargo Medium duty truck that I have. We purchased the front clip mostly for the engine that was in it, a 1959 354 Hemi from a truck, to put in my brother's 1956 Dodge 'K' 2.5 ton Truck, as his original 331 hemi needed...

boulef · boulef

I am president of the motoclub lles burners gum create in 1984 I roll in side car and harley, I roll in hot rod ford roadster 1932 and pontiac chieftain 1951, I also built 2 hot rod in my life, a radical and a nostalgia my master craftsman shoemaker shoemaker I am passionate year 20,30,40,50 and bebop jaz...

markc · markc

Evening, I just joined the forum and have enjoyed reading about your cars, related parts and stories. I am in my mid Forties and have been without a classic cars for 15 odd years since my Daughter was born. Previous to that I had a number of different muscles cars, Chevy S10 with a small block and my fa...

33rus · 33rus

Hi, My name is Igor, I live in Guelph, ON. Since 2011 I help interested individuals to ship/import Soviet cars (mostly Ladas) into the US. I imported my Lada to Canada last year, but here these cars have by all means a cheap image, so when I decided to sell it, I could barely break even and not lose money. Ev...

1934 FordLover · 1934 FordLover

Hello: I'm from St. Catharines I have two 1934 Fords : A roadster running a 229cu in chev 90degree V6, with a GMC6-53 blower, & 5 speed manual trans. A cabriolet running a GM ramjet350, 770R4, and narrowed Jimmy rear axle. Both vehicles have passed ( the 1980 std ) emission tests. Gary Morris

fraso · fraso

Hello everyone. I just came across this forum and liked the crowd so I decided to join. I'm with the Rods & Relics car club of Fort Erie and we host a car show every year at the Fort Erie Race Track. Over the years, I've learned a few things and wrote up what I've learned on my web site. If you're intere...

Brownbullhead · Brownbullhead

Hey all Live just outside Fergus, work in KW. Car : 2001 Camaro Z28 Rebuild 6.0 LQ4,853 Heads, Comp Cam - .617/.612 231/234 113LSA Longtubes Catted Y-Magnaflow Catback Lid, Free Ram Air mod HPTuners Tint OEM C5 Z06 Rims Aftermarket SS Hood OEM SS Spoiler (at paint shop currently) 2015 Z28 Badges

HardRocks · HardRocks

Hi everyone , just wanted to introduce myself . I'm new to the classic car/truck scene. Ive been into cars and trucks my whole life but just recently purchased my first classic truck . It's a 1967 Chevy c10 small rear window 305 . I'm eager to start looking through all the posts and gain knowledge from al...

Cuddles · Cuddles

Sorry for the delay. I am a 1929 Model A Tudor chopped and channeled with a 1966 289 cu. in.. I own a guy named James and we reside in the bustling metropolis of Keene, south east of Peterborough. We spend most days together in the garage until the weather turns (hopefully soon) and then we hope to meet w...

New Member from Wellington North · C5ZED06

Greetings All, New Guy here from Mount Forest. Currently running an 04 Z06 Ch'vette hence the handle. Been lurking around here for a bit & just recently added a more fitting '37 Ratty. Car is currently South of the Border and will make its way North if all goes as planned. Any advice/suggestio...

Phat guy garage · Phat guy garage

Just wanted to introduce myself.I own and operate a small independent auto repair estoration\hot rod shop just outside Beeton,actually 1/2 way between Tottenham and Beeton hence Beetonham.Offering full service automotive services,restorations and performance upgrades and performa...

Bruces · Bruces

Hi everybody ,new guy here building a ratty truck ,49 Ford f1 on a 2007 Canyon frame .

58 d100 · 58 d100

well well I'd like to start by saying thank you for accepting me. I join the rodders because my 13 year old son just purchased his first vehicle a 1958 D100 being there is no one around to teach these kids how to work on vehicles I figured it would be a perfect time to teach him because he showing interest in...

Kustoms · Kustoms

New owner of a 31 Chevy coupe 3 window!!

itsjunktoo · itsjunktoo

hey everyone, posting for the first time! been looking but not posting. current project is a a 1965 chevelle 300 2 door wagon v8 pg car plain jane going with updated brakes suspension sbc with a 200r4. goal is a long range cruiser. also in the shop is a 1936 ford 5w coupe streetrod project somewhat st...

icecube172 · icecube172

Hi everyone, New to the forum. My name is Bryan, came across this site while doing some research for my car project. About my project: Target is a Locost (Lotus/Caterham) Super 7. Currently still in the very infant stage of planning. I've always loved lightweight performance cars, Lotus is the compa...

Big Wheels · Big Wheels

I'm a new guy to this site as of today. A car enthusiast most of my life, I am now retired and still enjoy anything auto related. Whether going to cruise nights, (one of my favorites) to watching drag racing and monster trucks. I have owned many cars, a truck, and 2 motorcycles, but one thing I have neve...

Ruby · Ruby

Hi guys finally joined this site ,Im in Brantford area,proud member of the Piston Pushers and should probably introduce myself before i start asking all the questions lol Andy is the name and i have had my 1968 Camaro since I was 17 ..(60 yrs old now ..yea old guy ) 2nd owner and have turned every bolt mys...

scotty · scotty

this is my next project growing up listening to dad talk about all the cars hes seen and had i thought this would tickle him pink when i brought home this project probably the roughest anglia ive seen around but was in my budget im impressed at the people ive talked with about this car it wasnt long bef...

kruzr · kruzr

Thanks for adding me . Nice interesting site . My name is Jerry , currently don't have a ride but looking .I have built many street rods in my time and still help my friends with theirs the odd time . I see some familiar names . Thanks again , off to read some posts .

NOMAD · NOMAD

Hi from just outside of Ottawa. I just found this forum and decided to join. I just sold two old Corvettes (1956 & 1957) that I had completely restored. I sold them in the US when the Canadian dollar was low and made decent money on them. I would now like to have something to tinker with, I am thinkin...

Northernforce · Northernforce

Just trying to contact a new member here- ptek is what Randy goes by-he posted a bunch of stuff for sale over a week ago-I have sent him many pm's with no response-don't have his email-just wanted to make sure he received them-I know he has been online a few times this week -if anyone has his email please...

Southpaw · Southpaw

Hi everybody, I figured I would post some information about me before I beg you guys for knowledge. My name is Jamie, and I am Marten's son (he is building a 1953 Ford F-100). My uncle is Lightspeed_Mike, so both of those people have been driving forces in me growing up around cars and eventually me buyin...

Bones · Bones

New guy here. Just recently bought my first hot rod. Been wanting one for long as I can remember. It was either the graffiti coupe or the California Kid that got me hooked but either or we're rolling now. Next summers gonna be a blast.

Lurch · Lurch

Just Joined the site have been a avid hot Rod guy for a while.. Looking for people in my area to cruise and get togeather to chat as I retired to this area 4 years ago.I am into the ratrod part of the addiction. My latest obsession is my 1950 Plymouth P19 businessman coupe that has been lowered gutted and has...

CF-FZD · CF-FZD

I bought a 66' F-100 flare side short box I look forward to playing with, engine swap and installing a crown vic front suspension are on the to do list. I built a lime green 62' VW buggy that I sold to a guy in Innisfil last year but this is my first old domestic road vehicle. I've owned a classic airplane for...

Robert Anderson · Robert Anderson

Hi everyone: As a kid I used to get to lots of drag races at Golden Horseshoe, Cayuga and Niagara Falls. I took photos and ran across the photo albums the other day. I don't really want the photos anymore but would be happy to mail them along to someone who might be interested. They're not all the best b...

poncho62 · poncho62

flathead48 New Member Status: OfflinePosts: 3Date: 2h ago Permalink Reply Quote More Hi All; new boy on the block. been working on iron for many years. bought my first car in 1958. was a 49 ford 4dr with rear engine(motor was in the trunk in pieces). paid $7.00 for it. cost my dad $10.00 to get rid...

bluegoose · bluegoose

hello all.New guy here from Peterborough Ontario. I own a all original 1976 ford Maverick with straight 6. Currently building a roller 302 for it. just getting back into the scene. Thanks Adam

Chevy Girl · Chevy Girl

drive a 70 Chevelle SS 396 came from Bolton, now in Quinte West

Newbie · Newbie

I always wanted a hot rod and finally got it. Now I realize with a great dream comes responsibility. I know you folks probably built yours - I don't have that kind of skill. I can do bit more then the basics - but I'm finding it a bit hard to get started and learn the lingo of the parts I need for a few cosmeti...

Loco · Loco

Hello,,,,, My name is Murray and I live in Barrie.. My wife, Sue, and I currently own a 56 Chev Beauville wagon which after years of blood, sweat, and dollars it's back on the road. I recently retired from a life of railroading and have lots of time for my favourite hobby of playing with cars. After lots of...

Topic		Started By	Replies	Views	Last Post
	Introduction (Preview) Hi everyone iam new to this message board , so i thought i should tell you all a little about my self . I have built cars quite a few cars over the years everything from 1966 f100 on airbags to my old a trusty 1929 model A . I work at a local tire shop that does every thing from lawnmower tire to large tractor...	ABOB	8	308	April 12th by Marten
	New around here - Well kinda (Preview) It has been quite a number of years since being here. Most of you know who I am. Had to create a new account. 58 Chev Delray, have owned it for around 15yrs. Recently replaced the chassis with a solid one that was not rusted through. [img]https://i.img...	58Chev	3	294	January 18th by 58Chev
	I better reintroduce myself..lol (Preview) Hey guys its been long while.. I haven't been on here in a long time.. lots of new names I see.. The long time members might remember me.. my name is Chad. I am from guelph.. certified car nut for sure.. I have built and owned a ton of cars. I get the hot rod disease from my father who has been building hot rods...	Chad	6	686	Dec 10, 2019 by 51 Styline
	Hello from St Thomas ON (Preview) Hey everyone. New to the forum. Working on my first rod. 92 sierra step side. Engine is in, brand new 383 stroker. Have some bugs to work out. Hoping to gain lots of knowledge from this site. -- Edited by Iron-Man on Saturday 25th of May 2019 07:56:14 PM	Iron-Man	7	621	May 26, 2019 by Iwannagofast
	Reintroduction (Preview) Thought it might be a better idea to post a reintroduction since it seems to be four or so years since I was here last...... How time flies. Anyhow, my dads 50 Merc pick up is very close to road worthy (22 yrs of on and off building) and the trade off 55 is getting close as well. Currently we are planning a trek...	pistinbroke	14	679	Mar 20, 2019 by 427CARL
	Hello from Alberta (Preview) Hello all!! New member from Sherwood Park Alberta and first post from a long time car guy. I joined to keep tabs on my cousin Carl Hicks and see what's going on in the rest of Canada. I've had many cars over the years but have settled down to a 1986 Dodge Omni Turbo and a 1984 Rampage. I Bought the Omni new Feb 2...	GLHS60	10	681	Mar 16, 2019 by GLHS60
	Hello (Preview) I grew up in Ontario, half in Scarborough and the other half in Orillia. Then I made a trip out west to BC and stuck around. I’m searching for a 60’s Ford Econoline I built with my dad back in the 90’s. It’s Viper red with Weld wheels, door poppers, 350 Chev, tubbed, Ford 9” rear, all new glass and rubber. It w...	Wiggsy72	11	1149	Feb 23, 2019 by Wiggsy72
	Just wanted to say hello from Waterdown (Preview) Just wanted to introduce myself, I've just mostly finished(95% done) my 55 chevrolet 2dr sedan. My wife and I are hoping to put some miles on the car and attend a few of this year's events. Maybe we see some of you out there. Doug	Doug	17	2257	Feb 8, 2019 by chriscris
	New member from Waterdown (Preview) Hi guys, my name is Mike. I just joined the forum. I own a couple 1966 Chryslers, but I like old-school rods, customs and finned cars too. Here is my Newport convertible. Originally a California car. I tried to post pictures of my Windsor 2-door hardtop also, but the system said my post was too long. I to...	BigOldChryslers	6	572	Jan 19, 2019 by shag766
	Hello from Midland (Preview) Hello, glad to be able to join. Working on a 55 Sedan Delivery. Got a 70 AAR Cuda, 65 Satellite, 69 Chevelle -- Edited by poncho62 on Thursday 13th of December 2018 07:18:13 AM	300	6	825	Dec 14, 2018 by Iwannagofast
	Hello from Newfoundland (Preview) I was on here a few years ago but forgot my username so re-registered with my real name. Hard to forget that,lol. Right now my cars are a 61 Impala and a 76 Buick Skylark.	Brendan	11	828	Dec 7, 2018 by Redneck Rydes
	Hello from Windsor Ontario (Preview) I just wanted to say hello and a early Merry Christmas & Happy New year to every one I have been on this sight for a few months great site I am building a 1927 T roadster on a 1928 A frame in my back yard I gathered all my parts from around Ontario I started from scratch its coming along just wondering if th...	Ron	4	617	Dec 3, 2018 by 123pugsy
	Hello from London Ont. (Preview) Hey everyone I am new here. I have been into cars, trucks and motorcycles my whole life, 57 years now. My wife and I own a 1964 El Camino, 2002 Mustang GT convertible, lowered 2011 HHR panel,1978 Harley Lowrider,1982 Harley Superglide and a 2016 Jeep for the winter..I am retired and I spend most of my tim...	Thumpp	5	707	Oct 15, 2018 by poncho62
	Cambridge introduction (Preview) I am from the Hespeler end of Cambridge and I have been working on cars for the last 30 years in my shop. My daily driver is a 1976 F350 and my hotrod is a flat black pro street 1929 Pontiac coupe. I have a few projects on the go and I will post pictures when I have a moment. Glad to be part of the Ontario car scene a...	Nunner123	5	1586	May 18, 2018 by 427CARL
	Norfolk county (Preview) I'm from norfolk county . I've got a 65 nissan patrol that i would like to fix up. I've got a young family and don't get a tons of extra time but hopefully when my son is old enough he can help me	Mattmctree	5	887	May 13, 2018 by wuga
	Hello from California (Preview) Thank you so much for allowing me on this site.I enjoy one like it here in the states its called the hamb.I have been hooked on cars for a long time.My father was a mechanic and he and I would be at his shop building our first hot rod together .It was a fiberglass t-bucket I was 12 years old when we started it.W...	rustryder	11	1426	May 13, 2018 by Pete Moss
	Sudbury builder. (Preview) Hello from Sudbury in the great white north. I've been working on a 1952 (registered) (doors and cab are more like a 1950) Chevy pickup for a couple of years now. I bought all of the sheet metal from a friend who had the truck shipped from Saskatchewan about 10 years ago It was supposed to be his retirem...	Northern 52	14	2628	Jan 23, 2018 by Northern 52
	Hello from Durham (Preview) Hey guys and gals Just finished up a small restoration on my 1925 dodge 3 window. We had to weld in a new floor, then rhino lined the entire interior. Brand new Ford 9" rear end (Hated that) also put on disc brakes front and rear for more safety. Added 13 gallon fuel cell, Led lighting for headlights an...	Ken	4	1489	Dec 22, 2017 by Pete Moss
	From King Township (Preview) Hello all, First time poster and I am looking at building a truck from the front clip of a 1954 Fargo Medium duty truck that I have. We purchased the front clip mostly for the engine that was in it, a 1959 354 Hemi from a truck, to put in my brother's 1956 Dodge 'K' 2.5 ton Truck, as his original 331 hemi needed...	CanadianDodgeTrucks	11	4807	Dec 21, 2017 by 427CARL
	hello i am france (Preview) I am president of the motoclub lles burners gum create in 1984 I roll in side car and harley, I roll in hot rod ford roadster 1932 and pontiac chieftain 1951, I also built 2 hot rod in my life, a radical and a nostalgia my master craftsman shoemaker shoemaker I am passionate year 20,30,40,50 and bebop jaz...	boulef	2	1429	Dec 19, 2017 by 427CARL
	Car shopping (Preview) Evening, I just joined the forum and have enjoyed reading about your cars, related parts and stories. I am in my mid Forties and have been without a classic cars for 15 odd years since my Daughter was born. Previous to that I had a number of different muscles cars, Chevy S10 with a small block and my fa...	markc	10	2584	Dec 17, 2017 by Model A Guy
	From Guelph, ON (Preview) Hi, My name is Igor, I live in Guelph, ON. Since 2011 I help interested individuals to ship/import Soviet cars (mostly Ladas) into the US. I imported my Lada to Canada last year, but here these cars have by all means a cheap image, so when I decided to sell it, I could barely break even and not lose money. Ev...	33rus	1	1345	Dec 3, 2017 by poncho62
	Hello from St. Catharines (Preview) Hello: I'm from St. Catharines I have two 1934 Fords : A roadster running a 229cu in chev 90degree V6, with a GMC6-53 blower, & 5 speed manual trans. A cabriolet running a GM ramjet350, 770R4, and narrowed Jimmy rear axle. Both vehicles have passed ( the 1980 std ) emission tests. Gary Morris	1934 FordLover	9	2630	Sep 28, 2017 by fraso
	Hello from Fort Erie (Preview) Hello everyone. I just came across this forum and liked the crowd so I decided to join. I'm with the Rods & Relics car club of Fort Erie and we host a car show every year at the Fort Erie Race Track. Over the years, I've learned a few things and wrote up what I've learned on my web site. If you're intere...	fraso	4	1890	Sep 21, 2017 by fraso
	New guy from Fergus Area (Preview) Hey all Live just outside Fergus, work in KW. Car : 2001 Camaro Z28 Rebuild 6.0 LQ4,853 Heads, Comp Cam - .617/.612 231/234 113LSA Longtubes Catted Y-Magnaflow Catback Lid, Free Ram Air mod HPTuners Tint OEM C5 Z06 Rims Aftermarket SS Hood OEM SS Spoiler (at paint shop currently) 2015 Z28 Badges	Brownbullhead	4	2198	Sep 21, 2017 by fraso
	Greetings from New Tecumseth (Preview) Hi everyone , just wanted to introduce myself . I'm new to the classic car/truck scene. Ive been into cars and trucks my whole life but just recently purchased my first classic truck . It's a 1967 Chevy c10 small rear window 305 . I'm eager to start looking through all the posts and gain knowledge from al...	HardRocks	13	3216	Sep 20, 2017 by Phat guy garage
	I guess it is time I introduced myself. (Preview) Sorry for the delay. I am a 1929 Model A Tudor chopped and channeled with a 1966 289 cu. in.. I own a guy named James and we reside in the bustling metropolis of Keene, south east of Peterborough. We spend most days together in the garage until the weather turns (hopefully soon) and then we hope to meet w...	Cuddles	4	1806	Sep 20, 2017 by fraso
	New Member from Wellington North (Preview) Greetings All, New Guy here from Mount Forest. Currently running an 04 Z06 Ch'vette hence the handle. Been lurking around here for a bit & just recently added a more fitting '37 Ratty. Car is currently South of the Border and will make its way North if all goes as planned. Any advice/suggestio...	C5ZED06	5	2177	Sep 20, 2017 by fraso
	Hello from Beetonham New tech automotive\Phat guy garage (Preview) Just wanted to introduce myself.I own and operate a small independent auto repair estoration\hot rod shop just outside Beeton,actually 1/2 way between Tottenham and Beeton hence Beetonham.Offering full service automotive services,restorations and performance upgrades and performa...	Phat guy garage	5	1660	Sep 20, 2017 by fraso
	Hi ,from Sudbury (Preview) Hi everybody ,new guy here building a ratty truck ,49 Ford f1 on a 2007 Canyon frame .	Bruces	10	2001	Sep 20, 2017 by fraso
	new from webwood Ontario (Preview) well well I'd like to start by saying thank you for accepting me. I join the rodders because my 13 year old son just purchased his first vehicle a 1958 D100 being there is no one around to teach these kids how to work on vehicles I figured it would be a perfect time to teach him because he showing interest in...	58 d100	7	2241	Sep 20, 2017 by fraso
	Hello form Sudbury (Preview) New owner of a 31 Chevy coupe 3 window!!	Kustoms	7	2847	Sep 18, 2017 by Iwannagofast
	new guy in Niagara region (Preview) hey everyone, posting for the first time! been looking but not posting. current project is a a 1965 chevelle 300 2 door wagon v8 pg car plain jane going with updated brakes suspension sbc with a 200r4. goal is a long range cruiser. also in the shop is a 1936 ford 5w coupe streetrod project somewhat st...	itsjunktoo	13	2718	Sep 14, 2017 by Iwannagofast
	Hello from Stouffville! (Preview) Hi everyone, New to the forum. My name is Bryan, came across this site while doing some research for my car project. About my project: Target is a Locost (Lotus/Caterham) Super 7. Currently still in the very infant stage of planning. I've always loved lightweight performance cars, Lotus is the compa...	icecube172	8	1654	Sep 14, 2017 by Iwannagofast
	Hello from York Region (Preview) I'm a new guy to this site as of today. A car enthusiast most of my life, I am now retired and still enjoy anything auto related. Whether going to cruise nights, (one of my favorites) to watching drag racing and monster trucks. I have owned many cars, a truck, and 2 motorcycles, but one thing I have neve...	Big Wheels	4	1464	Sep 14, 2017 by Iwannagofast
	Newbie.. (Preview) Hi guys finally joined this site ,Im in Brantford area,proud member of the Piston Pushers and should probably introduce myself before i start asking all the questions lol Andy is the name and i have had my 1968 Camaro since I was 17 ..(60 yrs old now ..yea old guy ) 2nd owner and have turned every bolt mys...	Ruby	8	2125	Mar 6, 2017 by Redneck Rydes
	more content needed new to this site (Preview) this is my next project growing up listening to dad talk about all the cars hes seen and had i thought this would tickle him pink when i brought home this project probably the roughest anglia ive seen around but was in my budget im impressed at the people ive talked with about this car it wasnt long bef...	scotty	4	1941	Jan 21, 2017 by scotty
	Hello from Windsor (Preview) Thanks for adding me . Nice interesting site . My name is Jerry , currently don't have a ride but looking .I have built many street rods in my time and still help my friends with theirs the odd time . I see some familiar names . Thanks again , off to read some posts .	kruzr	4	2094	Jan 7, 2017 by teejay99
	Hi from Ottawa (Preview) Hi from just outside of Ottawa. I just found this forum and decided to join. I just sold two old Corvettes (1956 & 1957) that I had completely restored. I sold them in the US when the Canadian dollar was low and made decent money on them. I would now like to have something to tinker with, I am thinkin...	NOMAD	1	1649	Jan 2, 2017 by poncho62
	Hello ptek (Preview) Just trying to contact a new member here- ptek is what Randy goes by-he posted a bunch of stuff for sale over a week ago-I have sent him many pm's with no response-don't have his email-just wanted to make sure he received them-I know he has been online a few times this week -if anyone has his email please...	Northernforce	1	1748	Dec 17, 2016 by Northernforce
	New guy from North Gower (Preview) Hi everybody, I figured I would post some information about me before I beg you guys for knowledge. My name is Jamie, and I am Marten's son (he is building a 1953 Ford F-100). My uncle is Lightspeed_Mike, so both of those people have been driving forces in me growing up around cars and eventually me buyin...	Southpaw	0	1837	Nov 13, 2016 by Southpaw
	Hello from Callander Ont (Preview) New guy here. Just recently bought my first hot rod. Been wanting one for long as I can remember. It was either the graffiti coupe or the California Kid that got me hooked but either or we're rolling now. Next summers gonna be a blast.	Bones	5	1884	Nov 3, 2016 by cr55
	Greetings from Lurch in Markdale Ontario (Preview) Just Joined the site have been a avid hot Rod guy for a while.. Looking for people in my area to cruise and get togeather to chat as I retired to this area 4 years ago.I am into the ratrod part of the addiction. My latest obsession is my 1950 Plymouth P19 businessman coupe that has been lowered gutted and has...	Lurch	17	3592	Sep 21, 2016 by Rumblegutz
	New to the old car scene, Barrie. (Preview) I bought a 66' F-100 flare side short box I look forward to playing with, engine swap and installing a crown vic front suspension are on the to do list. I built a lime green 62' VW buggy that I sold to a guy in Innisfil last year but this is my first old domestic road vehicle. I've owned a classic airplane for...	CF-FZD	3	7846	Sep 14, 2016 by poncho62
	Old Drag Racing Photos (Preview) Hi everyone: As a kid I used to get to lots of drag races at Golden Horseshoe, Cayuga and Niagara Falls. I took photos and ran across the photo albums the other day. I don't really want the photos anymore but would be happy to mail them along to someone who might be interested. They're not all the best b...	Robert Anderson	5	3203	Aug 17, 2016 by Fast Elvis
	Flathead48 intro (Preview) flathead48 New Member Status: OfflinePosts: 3Date: 2h ago Permalink Reply Quote More Hi All; new boy on the block. been working on iron for many years. bought my first car in 1958. was a 49 ford 4dr with rear engine(motor was in the trunk in pieces). paid $7.00 for it. cost my dad $10.00 to get rid...	poncho62	2	1789	Aug 15, 2016 by jonny z
	Hello from Peterborough (Preview) hello all.New guy here from Peterborough Ontario. I own a all original 1976 ford Maverick with straight 6. Currently building a roller 302 for it. just getting back into the scene. Thanks Adam	bluegoose	2	2206	Jul 14, 2016 by Offset
	I'm the new girl (Preview) drive a 70 Chevelle SS 396 came from Bolton, now in Quinte West	Chevy Girl	9	2756	Jun 13, 2016 by Northernforce
	Hello - need some advice in Brantford Ontario (Preview) I always wanted a hot rod and finally got it. Now I realize with a great dream comes responsibility. I know you folks probably built yours - I don't have that kind of skill. I can do bit more then the basics - but I'm finding it a bit hard to get started and learn the lingo of the parts I need for a few cosmeti...	Newbie	6	2601	Jun 4, 2016 by Newbie
	Hello from Barrie (Preview) Hello,,,,, My name is Murray and I live in Barrie.. My wife, Sue, and I currently own a 56 Chev Beauville wagon which after years of blood, sweat, and dollars it's back on the road. I recently retired from a life of railroading and have lots of time for my favourite hobby of playing with cars. After lots of...	Loco	10	2677	May 26, 2016 by Marten
1 2 3 … 11 > Last» \| Page of 11 sorted by